604's in Open Baffle.

[Panomaniac]

48" tall puts your driver at a good hight. It also avoids having all baffle sides the same dimension, however much that matters.

How about a 1/4 sheet of ply? 24x48" with asymmetrical wings. Smaller footprint than your 36" baffle.

[tonino]

Hi All,
Yes the OB really reduces the boxy sound and still preserves a lot of the bass.My 604D in OB are capable to reproduce good bass till 120 hz. Below two khorn reproduce from 40 to 120 hz. You can see at :
www.estroarmonico.com/Altec_2.JPG
www.estroarmonico.com/Altec_3.JPG
www.estroarmonico.com/Altec_4.3.JPG














-

[tonino]

sorry:
www.estroarmonico.com/Altec_4.JPG


.

[tonino]

sorry again:
www.estroarmonico.com/altec_604d_2.JPG
www.estroarmonico.com/altec_604d_3.JPG
www.estroarmonico.com/altec_604d_4.JPG

[amandarae]

sorry again:
www.estroarmonico.com/altec_604d_2.JPG
www.estroarmonico.com/altec_604d_3.JPG
www.estroarmonico.com/altec_604d_4.JPG

How's that Brilliant Pebbles working out?

Abe

Abe

[tonino]

Brilliant Pebbles work thery good , they cancell many of the metal drive resonances. Here a pic of the Iconic network that I use in my system :
www.estroarmonico.com/iconic_MG_5343.JPG

[Panomaniac]

Nice looking setup, Tonino. Thanks for showing us.

(just a note: You may want to resize and compress your photos for the web. They're huge! 1.7 meg isn't best for web use. They don't need to be over 75KB)

[tonino]

sorry I will ask about to my webmaster

[VolvoHeretic]

Cradledorf, My first try, I come up with an ovel 3'-3" wide x 4'-7" tall by just picking a random even number dimension for an ellipse, leaving a 1/4" gap from the edge for cutting. I can show you, modify it and send you a grid in 1/2" or so dimensions to plot it and cut it out. I could also send you pdf file with a bunch of 8.5xll sheets you could print out and tape together for a full scale template.

[VolvoHeretic]